No products in the cart.
Search Results for "access point"
-
Ubiquiti Rocket-M2 Access Point
- Processor Specs:
- The Rocket-M2 is powered by an Atheros MIPS 24 KC processor with a clock speed of 400MHz. This processor provides the necessary computing power for wireless communication and management.
- Frequency:
- The device operates in the 2.4GHz frequency range, specifically on channels 1-11. For the international version, additional channels (12-14) are available. This frequency range is commonly used for WiFi communication.
- Memory:
- It features 64MB of SDRAM for memory and 8MB of flash memory for storing firmware and configurations.
- Networking Interface:
- The Rocket-M2 is equipped with a single 10/100 BASE-TX Ethernet interface (RJ-45 port) for connecting to the network.
- RF Connector:
- The device has two waterproof RPSMA connectors, allowing for the attachment of external antennas for enhanced signal reception and transmission.
- Power Method:
- The Rocket-M2 supports passive Power over Ethernet (PoE) using pairs 4,5+ and 7,8 return, enabling both data and power to be transmitted over a single Ethernet cable.
- Approvals and Compliance:
- The Rocket-M2 is compliant with regulatory standards such as FCC Part 15.247, IC RS210, and CE. It also meets RoHS compliance.
- Seamless Compatibility:
- The Rocket M2 is designed to work seamlessly with airMAX Rocket antennas, forming a cohesive system for reliable wireless communication. It can be easily mounted onto airMAX Rocket antennas.
327.00د.إ Add to Cart - Processor Specs:
-
Ubiquiti UISP airCube ISP Access Point – ACB-ISP-US
- Dimensions: 87.8 x 89.5 x 89.25 mm (3.46 x 3.52 x 3.51 inches)
- Weight: 280 g (9.88 oz)
- Management Interface: WiFi / Ethernet
- Networking Interface: 10/100 Fast Ethernet Ports
- LED: Status
- Operating Frequency: 2.4 GHz
- Antenna Gain: 4 dBi
- Max. Speeds: 300 Mbps
- Max. Power Consumption: 5W
- Max. TX Power: 20 dBm
- Power Supply: 5V
- Power Method:
-
-
- Micro-USB Adapter (Not Included)
- PoE 24V In on LAN Port 1
- Controllable 24V PoE Out (4, 5+, 7, 😎 on WAN Port
-
165.00د.إ Add to Cart -
Ubiquiti LTU Lite Access Point
- PtMP CPE: The LTU-Lite is designed to function as a client device in a Point-to-Multipoint setup, where it connects to a central BaseStation (LTU-Rocket) to establish wireless links to multiple client devices.
- 1024 QAM: The device supports 1024 Quadrature Amplitude Modulation (QAM), which allows for higher data rates and better signal quality compared to lower QAM schemes.
- Channel Bandwidth Flexibility: It supports a range of channel bandwidth options, including 10/20/30/40/50 MHz. This flexibility enables you to choose the appropriate channel width based on your deployment needs and available spectrum.
- Independent TX and RX Channel Frequency: The LTU-Lite supports independent configuration of transmit (TX) and receive (RX) channel frequencies within the 5 GHz radio band. This feature helps avoid local interference and optimize performance.
- Central Configuration Management: Configuration management for the LTU-Lite can be centrally handled from the Access Point (LTU-Rocket) side, streamlining the management process.
- Frequency Split: The device supports frequency split, which means the TX and RX frequencies can be different. This contributes to better interference management and overall performance.
- Auto Power Adjustments: The LTU-Lite is equipped with automatic power adjustment capabilities, allowing it to optimize its transmit power based on environmental conditions, link quality, and other factors.
- Router Mode Support: The device offers router mode support, allowing you to configure it as a router to provide network services to connected devices.
505.00د.إ Add to Cart -
Ubiquiti UAP-AC-HD Networks Access Point
- Establish a robust Wi-Fi network with the UniFi AC HD Access Point, an integral component of the Ubiquiti Networks UniFi Enterprise Wi-Fi System. The UAP-AC-HD is a versatile indoor/outdoor 802.11AC Wave 2 dual-band access point, designed for high-performance operations. It delivers impressive throughput speeds of up to 2533 Mbps and boasts a remarkable maximum range of up to 122 meters. Engineered to harness the capabilities of 802.11AC Wave 2, the UAP-AC-HD offers unparalleled multi-user support, ensuring a seamless Wi-Fi experience.
- Build Your Wi-Fi Network: Integrate the UniFi AC HD Access Point into your network, a vital component of the Ubiquiti Networks UniFi Enterprise Wi-Fi System.
- High-Performance Access Point: The UAP-AC-HD is designed for indoor/outdoor use and offers remarkable performance. It operates on both 802.11AC Wave 2 dual-bands, achieving throughput speeds of up to 2533 Mbps. With a maximum range of up to 122 meters, it is engineered to maximize the advantages of 802.11AC Wave 2 technology, ensuring exceptional multi-user support for an unparalleled Wi-Fi experience.
1,176.00د.إ Add to Cart -
Ubiquiti UAP-AC-LR AC WiFi Access Point
- Designed for Optimal RF Performance: The newly redesigned UniFi Controller optimizes RF performance.
- Spectral Analysis: Gathers feedback on full 5GHz and 2.4GHz WiFi channel interference.
- Band Steering: Guides connected WiFi clients to faster, interference-free 5GHz channels.
- Airtime Fairness: Reduces problematic client impact on system performance by managing their airtime access.
- Powerful Hardware: Incorporates the latest in WiFi 802.11AC MIMO technology, offering WiFi speeds up to 1300Mbps (450Mbps + 867Mbps).
- UK Power Cable Included: Includes a 1.8m IEC C5 cable, eliminating the need for an additional purchase in the United Kingdom.
- Google Maps Integration: Supports uploading custom coverage maps and configuring maps using the built-in Google Maps API.
- L3 Manageability: Allows the UniFi Controller software to be operated on a separate subnet from the managed UniFi APs, enabling ‘no-touch’ AP provisioning.
750.00د.إ Add to Cart -
Dlink DAP-X2850 Acces Point
- Manage with Nuclias Connect: Effortlessly manage the device using the intuitive Nuclias Connect platform.
- Next-Gen Wi-Fi 6: Experience the power of next-generation Wi-Fi 6 technology for enhanced performance.
- Enhanced Connectivity: Enjoy dual-band capabilities, 4×4 MIMO technology, band-steering, and airtime fairness for optimized network performance.
- High-Speed Uplink: Benefit from a 2.5 Gigabit uplink for swift data transmission.
- Software and App Access: Access the convenience of free-to-download software and a dedicated app for streamlined management.
- Flexible Installation: Easily install the device using Power over Ethernet (PoE) for added flexibility.
- IoT Compatibility: Tailored to accommodate Internet of Things (IoT) devices, ensuring seamless integration.
1,282.00د.إ Add to Cart -
Ubiquiti LAP-120 airMAX LiteAP AC Access
- Product Overview: The LAP-120 is an airMAX® AC AP with a 5 GHz frequency, boasting a 16 dBi gain and an expansive 120° coverage angle. Its design prioritizes an ultra-lightweight form factor, making it an ideal choice for wireless broadband bridging over long distances.
- Affordable Performance: Engineered to strike a balance between cost and performance, the LAP-120 stands as an affordable solution. It delivers reliable performance while meeting budget-conscious needs, making it an economical option for wireless connectivity.
- Mounting Flexibility: The inclusion of a ball-joint mount offers exceptional flexibility in adjusting the AP’s position. This adaptability enables various mounting options, ensuring the LAP-120 fits seamlessly into a variety of environments.
- Simplified Installation: With a focus on user convenience, the LAP-120 streamlines installation by utilizing minimal fasteners. No extensive tools are required—only a single wrench is necessary for efficient pole-mounting, simplifying the setup process.
- Ubiquiti LAP-120 airMAX LiteAP AC Access Point: Introducing the Ubiquiti LAP-120 airMAX LiteAP AC Access Point, a remarkable solution for wireless connectivity in the 5 GHz spectrum. With a 16 dBi gain and a wide 120° coverage angle, this AP boasts an ultra-lightweight design that’s perfect for long-distance wireless broadband bridging.
- Affordable Performance and Versatile Design: The LAP-120 is purposefully engineered to deliver exceptional cost/performance value. It’s tailored to strike a balance between affordability and performance, making it a prime choice for those seeking reliable connectivity without breaking the bank. Its ball-joint mount grants adjustment flexibility, allowing for versatile mounting options to suit various environments.
- Streamlined Installation and Convenience: Installation of the LAP-120 is a breeze. With a focus on user convenience, the design incorporates minimal fasteners to simplify the setup process. Notably, no elaborate tools are necessary—a single wrench suffices for efficient pole-mounting.
355.00د.إ Add to Cart -
D-Link DGS-1210-28P 28-Port Gigabit Smart Managed PoE Switch
- Port Configuration:
- 24 Ports: 10/100Base-T (Fast Ethernet) with Power over Ethernet (PoE) support
- 2 Ports: 1000Base-T Copper (Gigabit Ethernet) ports
- 2 Combo Ports: These are likely dual-purpose ports, which can be used as either SFP (Small Form-factor Pluggable) fiber optic ports or additional Gigabit copper ports.
- Additional Features:
- Auto Voice VLAN: This feature automatically assigns VLAN (Virtual LAN) settings for voice traffic, optimizing network performance for VoIP (Voice over IP) devices.
- Time-Based PoE: This feature allows you to schedule the availability of PoE power to connected devices based on specific time settings.
- PoE Power Budget: The switch provides a total PoE power budget of 193W, which indicates the maximum combined power it can supply to PoE-enabled devices.
- PoE Support: The switch supports both 15.4W and 30W PoE standards, which are commonly used for powering devices like IP cameras, VoIP phones, and access points.
1,068.00د.إ Add to Cart - Port Configuration:
-
D-Link DGSF1006P-E 250M 6-Port 10/100/1000 Switch with 4 PoE Ports
- Port Configuration: This switch has a total of 6 ports, with 4 of them supporting Power over Ethernet (PoE). PoE ports are commonly used to connect devices like wireless access points (APs), IP cameras, and IP phones, which can receive both data and power through a single Ethernet cable. This eliminates the need for separate power sources for these devices.
- Network Speed: The switch supports 10/100/1000 Mbps network speeds, which means it can handle both Fast Ethernet and Gigabit Ethernet connections. This flexibility allows you to connect devices with varying speed requirements.
- Compact Design: The DGS-F1006P-E is designed with home and small business users in mind. It has a compact form factor, making it suitable for environments with limited space. Its small size allows for easy placement in most rooms and offices.
- Silent Operation: One notable feature is its silent operation. This means the switch operates quietly, which can be important in home or small office settings where noise can be disruptive.
- PoE Support: The 4 PoE ports enable you to connect PoE-enabled devices directly to the switch without the need for additional PoE injectors or power adapters. This simplifies the setup and reduces cable clutter.
- Power Over Ethernet (PoE): The 4 PoE ports on this switch support IEEE 802.3af/at PoE standards. This means you can connect PoE-enabled devices like IP cameras, IP phones, or wireless access points directly to these ports. The switch provides power to these devices over the Ethernet cable, eliminating the need for separate power sources.
- Power Budget: The switch has a total power budget of 60 watts, which is distributed among the 4 PoE ports. Each PoE port can deliver up to 30 watts of power, allowing you to connect and power a variety of PoE devices.
- Uplink Ports: The 2 Uplink ports are typically used to connect the switch to the core network or other switches, enabling network expansion and connectivity to other devices.
- Installation Flexibility: The inclusion of PoE support allows for installation in hard-to-reach locations where power outlets may be scarce. This flexibility is particularly useful for deploying network devices in areas where running separate power cables would be challenging.
190.00د.إ Add to Cart -
D-Link DGS-F1100-10PS-E-E 10-Port Gigabit PoE Smart Managed Switch
- D-Link DGS-F1100 8 x 10/100/1000BASE-T PoE Ports: This d-link dgs-f1100 switch comes with 8 ports that support 10/100/1000 Mbps Ethernet connections and Power over Ethernet (PoE). PoE allows you to power devices like IP cameras, phones, or access points directly through the Ethernet cable, simplifying installation and reducing the need for additional power sources.
- 2 x SFP Ports: In addition to the Ethernet ports, this switch includes 2 Small Form-Factor Pluggable (SFP) ports. SFP ports provide flexibility for connecting to fiber-optic networks or other SFP-compatible devices.
- Supports IEEE 802.3at PoE: The switch supports IEEE 802.3at PoE, also known as PoE+ or Power over Ethernet Plus. This standard provides higher power levels compared to regular PoE (802.3af), making it suitable for powering a wider range of devices.
- Innovative D-Link Green Energy Saving Features: D-Link switches often include energy-saving features designed to reduce power consumption and promote environmental sustainability. These features can help lower operational costs while minimizing the carbon footprint.
- Complete Web Interface for Comprehensive Switch Management: The d-link dgs-f1100 switch is equipped with a web-based interface that allows for comprehensive management and configuration. This web interface typically provides access to various settings, including VLAN configuration, QoS (Quality of Service) settings, security features, and more, making it easier to customize the switch to your specific network requirements.
335.00د.إ Add to Cart -
Ubiquiti USW-16-POE UniFi Switch 16 PoE
- Ports: It includes sixteen Gigabit Ethernet ports, out of which eight are auto-sensing 802.3at PoE+ ports, and there are also two SFP ports.
- PoE Support: The switch provides Gigabit PoE links to your RJ45 Ethernet devices, which means it can power compatible devices over the Ethernet cables. This can be useful for devices like IP cameras, phones, or access points.
- Fiber Uplink: The switch offers Gigabit fiber uplink options to connect to your enterprise network using SFP (Small Form-factor Pluggable) ports. Fiber connections are often used for longer-distance and high-speed links.
- 1.3″ Touch LCM: It features a 1.3-inch touch LCM (Liquid Crystal Module) to provide status information, making it easier to monitor the switch’s status and configurations.
- Compact Design: The switch has a compact and fanless design with a depth of 7.9 inches, making it suitable for installation in a Small Office/Home Office (SOHO) rack cabinet.
- Management: It can be managed and configured by the UniFi Network Controller and also offers UniFi mobile app support. This means you can configure and monitor the switch remotely using a graphical user interface.
- Layer 2 Switching: The switch supports advanced Layer 2 switching protocols and features. It allows you to configure different operation modes (switching, mirroring, or aggregation) per port, giving you flexibility in how you use the switch.
- UniFi Network Controller: The switch is managed by the UniFi Network Controller, and it requires version 5.11.27 or higher of the controller software.
1,660.00د.إ Add to Cart -
Ubiquiti USW-Lite-8-PoE UniFi Switch Lite 8 PoE
Key Features:
- Port Configuration: 8 Gigabit Ethernet ports
- PoE Ports: 4 of the 8 ports support auto-sensing 802.3af/at PoE+ for powering compatible devices.
- PoE Wattage: The switch provides a total PoE wattage of 52W for UniFi Access Points or other PoE devices.
- Management: Managed and configured using the UniFi Network application (Version 5.13.10 or later) with support for the UniFi mobile app.
- Power Supply: It comes with an external 60W power adapter.
- Mounting: Wall-mountable (Kit included)
588.00د.إ Add to Cart -
Ubiquiti (USW-Flex) UniFi Switch Flex
Key Features:
- Port Configuration: It offers 5 RJ45 Gigabit Ethernet ports in total.
- PoE Support: The switch features one 802.3at/bt (PoE+/PoE++) input port for power and four 802.3af (PoE) Gigabit Ethernet ports for connecting and powering devices.
- Power Output: The switch can provide up to 15W of PoE output per port to power UniFi access points or other PoE devices.
- Compatibility: When used with 802.3bt rated PoE switches like USW-Pro-48-PoE, USW-Pro-24-PoE, US-XG-6POE, and USW-Industrial switches (sold separately), the USW-Flex can support a maximum PoE output budget of 46W.
- Weatherproof Housing: It comes with a weatherproof housing, making it suitable for outdoor installations.
- Mounting Options: The switch offers versatile mounting options, allowing you to install it in various locations.
- Management: The UniFi Switch Flex can be managed and configured using the UniFi application or UniFi Mobile app. This provides an easy-to-use graphical user interface for configuring and monitoring switch features.
464.00د.إ Add to Cart -
D-link DIR-825 AC1200 Wi-Fi Gigabit Router
- Wireless Standard: Wireless AC 1200, which includes support for 802.11a, 802.11b, 802.11g, 802.11n, and 802.11ac Wi-Fi standards.
- Dual Band: It operates on both the 2.4 GHz and 5 GHz frequency bands, allowing for better performance and reduced interference.
- Ports: It has 4 Gigabit Ethernet ports, which provide high-speed wired connections.
- Gigabit WAN: The router includes a Gigabit WAN (Wide Area Network) port for connecting to high-speed internet services.
- Antennas: Equipped with 4 external antennas, which can improve wireless signal strength and coverage.
- VPN Support: It supports Virtual Private Network (VPN) functionality, which can enhance security and privacy for your network.
- Multiple Operational Modes: The router can function in various modes, including Router, Access Point, Repeater, WISP (Wireless Internet Service Provider), and WiFi Client modes.
- Dual Access PPPoE: This feature, known as Russian PPPoE, allows for dual access connections in Point-to-Point Protocol over Ethernet (PPPoE) for certain network configurations.
- Interchangeable Plug: The router includes interchangeable UK/EU plugs, making it suitable for use in different regions with varying power plug standards.
132.00د.إ Add to Cart -
D-Link DGS-F3008P-4S Industrial Switch
- Ports: It has 8 10/100/1000Mbps PoE (Power over Ethernet) ports and 4 Gigabit SFP (Small Form-Factor Pluggable) ports. PoE allows you to power compatible devices like IP cameras or access points through the Ethernet cable.
- PoE Support: It supports IEEE802.3af/at standards for PoE, with a maximum power output of 46W per port. This means it can provide both data connectivity and power to PoE-enabled devices.
- Management: The switch is managed, which means you can configure and control its settings for optimal network performance. It supports various management features like link aggregation, STP (Spanning Tree Protocol), loop protection, IGMP (Internet Group Management Protocol), and 802.1X authentication for network security.
- Redundant Power: It has dual power supply voltage input, supporting 48-56V DC. This redundancy helps ensure continuous operation in case of power supply issues.
- Protection: The switch offers protection features such as inversed grafting protection and overcurrent protection, which can help safeguard the network and the switch itself.
- Looping Network Self-Healing: It features RUN-Ring technology, which enables the network to self-heal in case of loops, with a self-healing time of up to 10ms. This helps maintain network stability.
- IP40 Grade Protection: The switch is designed to withstand harsh environmental conditions and has an IP40 rating for protection against dust and some moisture.
- Operating Temperature: It can operate in a wide temperature range from -40°C to 75°C, making it suitable for industrial environments with extreme temperatures.
- Power Adapter: It comes with a 120W industrial power adapter to provide power to the switch.
-
D-Link DGS-F1210-18PS-E Layer 2 Gigabit Managed Long Range PoE+ Surveillance Switch
Port Configuration:
- 16 ports support 10/100/1000 Mbps Ethernet and provide PoE capabilities.
- 2 ports are Gigabit SFP uplink ports, which can be used for high-speed network connections.
Power Over Ethernet (PoE):
- The switch supports both IEEE 802.3at and IEEE 802.3af PoE protocols.
- It has a total PoE budget of 150 watts, allowing it to power PoE-capable devices.
- PoE is beneficial for devices like wireless Access Points (APs) and IP cameras, as it eliminates the need for additional power cables and can be especially useful when these devices are located far from power outlets.
658.00د.إ Add to Cart -
D-Link DGS-F1026P-E 24 Port PoE 1000 Mbps Switch with 2 SFP Slots
High-Speed Networking:
- 24 Ethernet ports with speeds of 10/100/1000 Mbps
- Full/half-duplex support for Ethernet, Fast Ethernet, and Gigabit
- 2 SFP uplink ports for expansion
Functions:
- VLAN support
- EXTEND feature
- PoE (Power over Ethernet) support
- QoS (Quality of Service)
Easy Setup:
- Plug-and-play installation for hassle-free configuration
- Auto MDI/MDI-X crossover on all ports
PoE Functionality:
- Twenty-Four PoE ports for powering devices
- IEEE 802.3af/at compliant for PoE standards
- Total power budget of 250W
- Supports up to 30W power output per PoE port
742.00د.إ Add to Cart -
D-Link DGS-1005P 5-Port Gigabit Desktop Switch with 4 PoE ports
Ports:
- Equipped with five 10/100/1000 Gigabit Ethernet ports.
- Four ports support Power over Ethernet (PoE), simplifying device connectivity.
PoE Standard:
- IEEE 802.3at compliant, delivering up to 30W of power per PoE port.
PoE Budget:
- Boasts a robust total PoE budget of 60W, ensuring ample power supply for connected PoE-enabled devices.
Easy Installation:
- Offers plug-and-play simplicity for hassle-free installation, making it ideal for users of all levels of expertise.
Build Quality:
- Features a sturdy metal housing, enhancing durability and longevity. Built to withstand demanding network environments.
Warranty:
- Backed by a limited lifetime warranty, providing users with peace of mind and assurance of product reliability.
147.00د.إ Add to Cart -
D-Link DES-F1006P-E 6-port 10/100Base-T Unmanaged Long Range 250m PoE
Port Configuration:
- 6 x 10/100Base-T Ethernet ports
- 4 of the 6 ports support Power over Ethernet (PoE)
PoE Support:
- 4 PoE ports
- 60W PoE power budget
- Long-range PoE support, allowing for connections up to 250 meters
115.00د.إ Add to Cart -
D-Link DGS-1210-10MP 8-Port Gigabit Switch
- 8 x 10/100/1000BASE-T PoE ports
- 2 x Gigabit SFP ports
- Advanced L2 switching and security features
- L2+ Static Routing
- Optional “standard mode” or “surveillance mode” management user interface
- 130W PoE budget
665.00د.إ Add to Cart