No products in the cart.
-
D-Link DGS-F3008P-4S Industrial Switch
- Ports: It has 8 10/100/1000Mbps PoE (Power over Ethernet) ports and 4 Gigabit SFP (Small Form-Factor Pluggable) ports. PoE allows you to power compatible devices like IP cameras or access points through the Ethernet cable.
- PoE Support: It supports IEEE802.3af/at standards for PoE, with a maximum power output of 46W per port. This means it can provide both data connectivity and power to PoE-enabled devices.
- Management: The switch is managed, which means you can configure and control its settings for optimal network performance. It supports various management features like link aggregation, STP (Spanning Tree Protocol), loop protection, IGMP (Internet Group Management Protocol), and 802.1X authentication for network security.
- Redundant Power: It has dual power supply voltage input, supporting 48-56V DC. This redundancy helps ensure continuous operation in case of power supply issues.
- Protection: The switch offers protection features such as inversed grafting protection and overcurrent protection, which can help safeguard the network and the switch itself.
- Looping Network Self-Healing: It features RUN-Ring technology, which enables the network to self-heal in case of loops, with a self-healing time of up to 10ms. This helps maintain network stability.
- IP40 Grade Protection: The switch is designed to withstand harsh environmental conditions and has an IP40 rating for protection against dust and some moisture.
- Operating Temperature: It can operate in a wide temperature range from -40°C to 75°C, making it suitable for industrial environments with extreme temperatures.
- Power Adapter: It comes with a 120W industrial power adapter to provide power to the switch.
-
D-Link DGS-F1210-18PS-E Layer 2 Gigabit Managed Long Range PoE+ Surveillance Switch
Port Configuration:
- 16 ports support 10/100/1000 Mbps Ethernet and provide PoE capabilities.
- 2 ports are Gigabit SFP uplink ports, which can be used for high-speed network connections.
Power Over Ethernet (PoE):
- The switch supports both IEEE 802.3at and IEEE 802.3af PoE protocols.
- It has a total PoE budget of 150 watts, allowing it to power PoE-capable devices.
- PoE is beneficial for devices like wireless Access Points (APs) and IP cameras, as it eliminates the need for additional power cables and can be especially useful when these devices are located far from power outlets.
658.00د.إ Add to Cart -
Ubiquiti U-Cable-Patch-3M-RJ45-Wt Ethernet Patch Cable
- Bendable Booted RJ45 Connector: The cable is equipped with a bendable booted RJ45 connector, which makes it easier to connect and maneuver in tight spaces.
- Ultra-thin Design: With an ultra-thin OD of 3mm, this cable is designed to be compact and space-saving.
- Cable Length Options: The cable is available in various lengths, starting from 3 meters, providing flexibility in cable length selection to suit different networking needs.
- TIA-568-B.2 Cat6 Channel Test Passed: This cable has passed the TIA-568-B.2 Cat6 channel test, ensuring that it meets industry standards for Cat6 Ethernet performance.
- Color: The cable is available in the color “White” (Wt).
94.00د.إ Add to Cart -
Ubiquiti (UDC-3) Direct Attach Copper Cable
- SFP+: SFP+ stands for Small Form-Factor Pluggable Plus, and it’s a compact, hot-swappable transceiver module commonly used for high-speed data communication.
- High Performance: These cable assemblies offer excellent performance, making them suitable for demanding network applications that require high-speed data transfer.
- Cost-Effective: They are a cost-effective solution, which can be beneficial for organizations looking to optimize their network infrastructure without excessive costs.
- Port Density: SFP+ copper modules provide hardware manufacturers with the ability to achieve high port density. This means that you can have more ports in a given space, which can be essential for data centers and networking equipment with limited physical space.
- Configurability: These cable assemblies offer configurability options, allowing network administrators to tailor their network setups to specific requirements.
- Low Power Budget: Despite their high performance, SFP+ copper modules are designed to operate at a reduced power budget. This can be important for energy-efficient networking solutions.
- Meeting Standards: The cable assemblies are designed to meet and exceed industry-standard requirements for performance and reliability, including those for Gigabit Ethernet and Fiber Channel.
158.00د.إ Add to Cart -
D-Link NCB-C6UGRYR-305-24 Cat6 UTP 24AWG Solid Cable
- Model: NCB-C6UGRYR-305-24
- Cable Type: Cat6
- Conductor Gauge: 24 AWG (American Wire Gauge)
- Conductor Type: Solid (as opposed to stranded)
- Color: Gray
427.00د.إ Add to Cart -
Ubiquiti UISP Cable Carrier
Key Features:
- 1,000 ft (305 m) Category 5e cable
- 24 AWG solid copper conductor pairings
- Insulated, weatherproof cable jacket
- Internal braid and foil shielding
- Drain wire that protects against ESD damage
- Anti-crosstalk divider
788.00د.إ Add to Cart -
Ubiquiti UDC-1 Direct Attach Copper Cable
- Connector: LC-LC
- Fiber Mode: 50 / 125 μm
- Fiber Type: Duplex
- Cable Jacket: PVC
- Cable Standard: OM3
- Insertion Loss: ≤ 0.3 dB
- Polish: UPC to UPC
- Jacket OD: 2.0 mm
- Wavelength: 850 / 1310 nm
- Jacket Color: Aqua
- Repeatability: ≤ 0.1 dB
- Durability: ≤ 0.2 dB (1000 Times Mating)
- Return Loss: ≤ 50 dB
- Operating Temperature: -40 to 75° C (-40 to 167° F)
180.00د.إ Add to Cart -
Ubiquiti U-Cable-Patch-1M-RJ45-bl Ethernet Patch Cable
Key Features:
- Equipped with a flexible booted RJ45 connector.
- Exceptionally slim with an outer diameter of 3mm.
- Available in cable lengths starting from 1 meter.
- Successfully passes the TIA-568-B.2 Cat6 Channel test conducted by Fluke.
- Comes in a vibrant Blue color.
79.00د.إ Add to Cart -
D-Link Cat6 305-meter UTP 24 AWG Cable Rolls
Key Features:
- Consists of 4 Pairs of Unshielded Twisted Pair (UTP) Cable.
- Conductor Material: Solid Bare Copper with 24 AWG.
- Color Code: Gray
- Manufactured in India
- Product Code: NCB-C6UGRYR-305-24AWG
- Mutual Capacitance: 5.6nF/100m nominal
- Characteristic Impedance: 100+15%
- Nominal Velocity of Propagation: 69%
- Conductor Resistance: < 9.38/100m
- Mutual Capacitance: < 5.6nF/100m
- Resistance Unbalance: 5% Max
- Capacitance Unbalance: 330pF/100m
- Delay Skew: < 45nS
- Conductor Diameter: 0.520mm Nominal
- Insulation Diameter: 0.940mm Nominal
- Insulation Material: HD-PE
- Cable Diameter: 5.7mm
430.00د.إ Add to Cart -
Ubiquiti U-Cable-Patch-2M-RJ45-Wt Ethernet Patch
Key Features:
- Comes with a flexible booted RJ45 connector.
- Remarkably slim with an outer diameter of 3mm.
- Available in cable lengths starting from 2 meters.
- Successfully passes the TIA-568-B.2 Cat6 Channel test conducted by Fluke.
- Available in a clean white color.
79.00د.إ Add to Cart -
D-Link DCC-CAL-90 90m Standard CCTV cable
CCTV Cable Details:
- Color & Material of Outer Sheath: FR PVC_White (IEC 60332-1)
- Cable Diameter (Oval): 5.6+/- 0.3mm
- Jacket Thickness: 0.60+/- 0.2mm
COAXIAL Cable Details:
- Inner Conductor: Copper
- Number of Conductors: 1.00
- Conductor Diameter: 0.50+/- 0.020mm
- Dielectric: Solid PE
- Color: Natural
- Diameter: 1.35+/- 0.10mm
- Shield: 6mm Silver Aluminum Foil
- Shield – Braiding: Alloy Braiding
- Number of Braiding Wires: 48
- Coax Jacket: PVC Type ST1
- Video Core OD: 2.70+/- 0.20mm
- Color: Black
CONDUCTOR Details:
- Number of Strands: 7.00
- Strand Diameter: 0.14+/- 0.020mm
- Insulation: PVC Type A
- Diameter (Average): 1.25+/- 0.20mm
180.00د.إ Add to Cart -
Ubiquiti U-Cable-Patch-3M-RJ45-Bk Ethernet Patch Cable
- Equipped with a flexible booted RJ45 connector.
- Remarkably slim with an outer diameter of 3mm.
- Available in cable lengths starting from 3 meters.
- Successfully passes the TIA-568-B.2 Cat6 Channel test conducted by Fluke.
- Available in a sleek black color.
94.00د.إ Add to Cart -
D-LInk KVM-401 PS2 KVM cable for KVM-440/450 Switches
- Space-Saving Design: Saves valuable desk space by combining multiple cables into one.
- Color-Coded for Easy Connection: Each cable follows the PC99 color code, ensuring proper and hassle-free connections.
- EMI and RFI Reduction: Each cable features a special screen with a ferrite core, effectively reducing electromagnetic (EMI) and radiofrequency interference (RFI).
- Connector #1 (Monitor): VGA with a 15-pin HDB male connector.
- Connector #2 (Computer): USB with a USB Type A male connector.
- Connector #3 (Mouse): PS/2 with a 6-pin mini-DIN male connector.
- Connector #4 (Keyboard): PS/2 with a 6-pin mini-DIN male connector.
- Connector #5 (KVM): 15-pin male connector.
- Operating Supply Voltage:
- Voltage: 30 V
- Cable Length:
- Length: 1.8 meters
- Weight:
- Weight: 231 g
71.00د.إ Add to Cart -
Ubiquiti U-Cable-Patch-1M-RJ45-Bk Ethernet Patch Cable
- Equipped with a flexible booted RJ45 connector.
- Remarkably slim with an outer diameter of 3mm.
- Available in cable lengths starting from 1 meter.
- Successfully passes the TIA-568-B.2 Cat6 Channel test conducted by Fluke.
- Comes in a sleek black color.
79.00د.إ Add to Cart -
Ubiquiti (LBE-M5-23) Networks LiteBeam Access Point
- Wireless Bridge: The LiteBeam M5 is designed as a long-range wireless bridge and customer premises equipment (CPE) for outdoor applications.
- High Throughput: It offers a wireless throughput of 100+ Mbps, making it suitable for various data transmission needs.
- Long-Range: With a 23dBi antenna, the LiteBeam M5 provides long-range wireless connectivity, making it ideal for point-to-point or point-to-multipoint connections over extended distances.
- Lightweight Design: The device features a lightweight and compact design, making it easy to install and mount in various outdoor settings.
- airMAX Technology: It utilizes Ubiquiti’s airMAX technology, which is designed for efficient wireless performance and scalability.
250.00د.إ Add to Cart -
Ubiquiti UAP-AC-SHD UniFi SHD Access Point
- Simultaneous Dual-Band 4×4 Multi-User MIMO
- Four-Stream 802.11AC Wave 2 Technology
- 5 GHz Band with Radio Rate of up to 1.7 Gbps
- Dedicated Security Radio with Persistent Threat Management
- 2.4 GHz Band with Radio Rate of 800 Mbps
- 802.3at PoE+ Compatible
- (2) Gigabit Ethernet Ports
1,805.00د.إ Add to Cart -
Ubiquiti Wave-AP UISP Wave Access Point
- 60 GHz PtMP access point with Wave Technology.
- Connects up to 15 stations and provides up to 5.4 Gbps total throughput (2.7 Gbps duplex).
- Includes a high-performance 5 GHz backup radio for uninterrupted connections.
- Equipped with a Bluetooth radio for easy setup via the UISP® Mobile app.
- Features:
- 5 GHz backup radio.
- Supported stations and distances:
- Wave Long-Range: up to 8 km.
- Wave Nano: up to 5 km.
- WAN Ports: (1) 10G SFP+, (1) 2.5GbE.
- Integrated GPS antenna.
- Link planning support through the ISP Design Center.
3,340.00د.إ Add to Cart -
Ubiquiti LAP-GPS airMAX Lite AC AP, 5 GHz, GPS Access Point
- 5 GHz Frequency Range: The LiteAP AC operates in the worldwide, license-free 5 GHz frequency range. This frequency band is known for its reliability and is often used for point-to-point and point-to-multipoint wireless connections.
- GPS Synchronization Support: The access point supports GPS synchronization, which can be important for ensuring precise timing and coordination in wireless networks, especially when multiple access points are deployed.
- High-Performance 90 Degree Antenna: The LiteAP AC is equipped with a high-performance 90-degree antenna. This directional antenna is designed to provide a focused and efficient wireless signal in a specific direction, making it suitable for point-to-multipoint applications.
- Affordable Cost/Performance Solution: Ubiquiti Networks has designed the LiteAP AC to be a cost-effective solution that delivers high performance. This makes it an attractive choice for network deployments where cost is a consideration.
- Ultra-Lightweight Form Factor: The LiteAP AC features an ultra-lightweight form factor, which can simplify installation and deployment. Its compact design allows for easy mounting and positioning.
450.00د.إ Add to Cart -
D-Link DBA-1210P Nuclias Cloud-Managed AC1300 Wave 2 Access Point
- Wireless Standard: This access point supports the Wireless AC1200 Wave 2 standard, which means it offers high-speed wireless connectivity with support for 802.11ac Wave 2 technology. This results in faster wireless speeds and improved performance compared to earlier wireless standards.
- Gigabit PoE Port: It comes equipped with a Gigabit Ethernet port that supports Power over Ethernet (PoE). PoE allows you to power the access point through the Ethernet cable, simplifying installation and eliminating the need for a separate power source.
- Centralized Cloud-Based Management: One of the standout features of this access point is its centralized cloud-based management. This means you can manage and configure the access point remotely via a cloud-based platform. It simplifies network management, allows for remote troubleshooting, and provides insights into your network’s performance.
- 1-Year Cloud License Included: The product includes a 1-year cloud license, which typically covers your initial subscription to the cloud-based management platform. After the initial period, you may need to renew the license for continued access to cloud-based management services.
- Centralized Cloud-Based Management: The access point is part of the Nuclias Cloud platform, which provides centralized cloud-based management. This means you can manage and configure the access point, along with other network devices, through an intuitive web-based interface or a mobile app. This centralized management simplifies network administration and monitoring.
- High Throughput: The access point supports dual-band operation, offering transfer speeds of up to 400 Mbps in the 2.4 GHz band and 867 Mbps in the 5 GHz band. This provides superior throughput, making it suitable for demanding applications and multiple connected devices.
- IEEE 802.11ac Wave 2: It utilizes IEEE 802.11ac Wave 2 wireless technology, which enhances performance and capacity. This is particularly useful in environments with high device density and network congestion.
- WPA3 Support: The access point supports WPA3, the latest Wi-Fi security standard, providing enhanced protection for your wireless network.
- Band Steering: Band Steering is a feature that encourages 5 GHz-capable devices to connect to the faster 5 GHz band, optimizing network performance.
- Beamforming: Beamforming technology improves connectivity by tracking devices and adjusting the signal direction to provide better coverage, especially for mobile devices on the move.
- Guest Network: You can create a secure guest network with various authentication options, including social login, to offer internet access to visitors without compromising your main network’s security.
- Power over Ethernet (PoE): The access point supports Power over Ethernet, which simplifies installation by allowing both data and power to be delivered over a single Ethernet cable. This reduces cable clutter and provides more flexible placement options.
- Zero Touch Deployment: This feature streamlines the deployment process, allowing you to get the access point online quickly and easily.
- Integrated DHCP Server: The access point includes an integrated DHCP server, providing stand-alone capabilities for network configuration.
594.00د.إ Add to Cart -
Ubiquiti UAP-NanoHD UniFi nanoHD Access Point
- Omni-directional 802.11ac Wave 2 Wi-Fi Access Point:
- The UniFi nanoHD is an access point that supports 802.11ac Wave 2 technology, providing high-performance wireless connectivity.
- 4×4 MU-MIMO Technology:
- This access point utilizes 4×4 MU-MIMO (Multiple-Input, Multiple-Output) technology, allowing it to handle multiple data streams simultaneously. MU-MIMO improves the efficiency of the wireless network and enhances the user experience.
- Dual-Band Operation:
- The access point operates on both the 2.4 GHz and 5 GHz bands, offering flexibility and better performance in various scenarios.
- Supports Over 200 Concurrent Users:
- With the ability to support over 200 concurrent users, the UniFi nanoHD is suitable for environments with a high density of connected devices, such as offices, schools, or crowded public spaces.
- 5 GHz Band 4×4 Multi-User MIMO:
- In the 5 GHz band, the access point supports 4×4 Multi-User MIMO with a radio rate of 1.733 Gbps. This provides high-speed, reliable connectivity for bandwidth-intensive applications.
- 2.4 GHz Band 2×2 MIMO:
- In the 2.4 GHz band, the access point supports 2×2 MIMO with a radio rate of 300 Mbps. This ensures compatibility with older devices that may not support the 5 GHz band.
- Powered by Gigabit 802.3af PoE+:
- The UniFi nanoHD can be powered using Gigabit 802.3af PoE+ (Power over Ethernet+), simplifying installation and eliminating the need for a separate power source.
677.00د.إ Add to Cart - Omni-directional 802.11ac Wave 2 Wi-Fi Access Point: